Item number:
90139
Description
Switching actuator for switching loads
DIN-rail mount device, width 72 mm (4TE, SA4 - 230 / 16 /) or 144 mm (8 TE, SA8 - 230 / 16 /) for mounting on a DIN-rail (TH35 EN 60715) for installation in a switch cabinet
Transformer-based current measurement (± 10mA)
True effective value measurement (current)
Voltage-synchronous active power measurement
The device has four (SA
4
- 230 / 16 /) or eight (SA
8
- 230 / 16 /) independant potential-free NO contacts
The switching contacts are optimised for capacitive loads
Manual switches for switching without bus tension
The switching actuator is powered by the KNX bus, no additional power supply required
Connection of the outputs is realised by means of screw terminals
The voltage is assumed to be sinusoidal. For the channels 2 ... 4, the phase shift can be adjusted via ETS when using different phase conductors (three-phase alternating current).
- Voltage:
- via KNX BUS
- Dimensions:
- 93339= (8 TE) 90 x 144 x 64 mm
90139= (4 TE) 90 x 72 x 64 mm - typ. power input:
- 5 mA typical
20 mA max. - Power consumption:
- 0.15 W
- Degree / class of protection:
- 93339= IP20 / Class II
90139= IP20 / Class II - Ambient temperature:
- -5 °C to +45 °C
- KNX TP 256:
- Yes
- Connections and wires:
- 0.2 ... 4.0 mm² rigid
0.25 ... 2.5 mm² fine-wired (with or without ferrule), USB - Channel 1 to channel 4 or 8
- Switching power:
- 3680 W, cos φ = 1
max. inrush current Ip (150 µs) = 600 A - Type of contact:
- µ-contacts, dry NO contact, (if N is connected, channel 1 is no longer potential-free and is used to determine the phase position)
- Outputs:
- 90139= 4 switching outputs
93339= 8 switching outputs - Current measurement
- Active power measurement
Characteristics
Color
Grey
Model ean
4007529901395
Voltage
via KNX BUS
Dimensions
93339= (8 TE) 90 x 144 x 64 mm
90139= (4 TE) 90 x 72 x 64 mm
Power consumption
0.15 W
Degree / class of protection
93339= IP20 / Class II
90139= IP20 / Class II
Ambient temperature
-5 °C to +45 °C
Connections and wires
0.2 ... 4.0 mm² rigid
0.25 ... 2.5 mm² fine-wired (with or without ferrule), USB
Switching power
3680 W, cos φ = 1
max. inrush current Ip (150 µs) = 600 A
Type of contact
µ-contacts, dry NO contact, (if N is connected, channel 1 is no longer potential-free and is used to determine the phase position)
Additionally
We are official suppliers of KNX equipment.
Found cheaper?
On order
Our managers will be sure to contact you with the terms of your order
Special price for automation specialists.
To get a discount, order the product online or email info@knxpoint.com
To get a discount, order the product online or email info@knxpoint.com
Characteristics
Color
—
Grey
Model ean
—
4007529901395
Voltage
—
via KNX BUS
Dimensions
—
93339= (8 TE) 90 x 144 x 64 mm
90139= (4 TE) 90 x 72 x 64 mm
Power consumption
—
0.15 W
Degree / class of protection
—
93339= IP20 / Class II
90139= IP20 / Class II
All characteristics
Price valid for online shop only and may differ from retailer prices
Need a consultation?
Our experts will answer any question you may have
Ask a Question