Description
The blind actuators KNX SBA receive KNX telegrams and control several blind motors with limit switches independently of one another
Each channel is controlled with two monostable relays and can also be manually activated with the buttons at the actuator
Each channel can be individually programmed through the ETS3/4. Status reports, blocking functions, central switch functions and extensive calibration and positioning functions are available for selection
In the event of bus voltage failure or resumption, the switch positions of the relay can be individually programmed for each channel
The device is planned for permanent installation on a DIN-rail (top-hat) in high voltage current distributors
Installation must take place in dry interiors
- Voltage:
- 230 V AC 50 Hz
- Dimensions:
- (4 TE) 86 x 72 x 60 mm
- Output voltage:
- 230 V AC 50 Hz
- Degree / class of protection:
- IP20 / Class II
- Ambient temperature:
- 0 °C to +45 °C
- Housing:
- Plastic LEXAN UL-94-V0
- Display elements:
- Red LED: Programming LED
Green LED: Channel status - Manual operation:
- Manual operation of the shutter channels directly on the device
- KNX TP 256:
- Yes
- Switching power:
- Roller shutter motors
Characteristics
Color
White
Model ean
4007529939305
Voltage
230 V AC 50 Hz
Dimensions
(4 TE) 86 x 72 x 60 mm
Degree / class of protection
IP20 / Class II
Ambient temperature
0 °C to +45 °C
Housing
Plastic LEXAN UL-94-V0
Switching power
Roller shutter motors
Additionally
We are official suppliers of KNX equipment.